# # Patch managed by http://www.holgerschurig.de/patcher.html # --- /dev/null +++ linux-2.6.10-rc2/drivers/input/keyboard/corgikbd.c @@ -0,0 +1,283 @@ +/* + * Corgi keyboard driver for Linux/ARM + * + * Copyright (c) 2004 Richard Purdie + * + * Based on xtkbd.c/locomkbd.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#define KB_ROWS 8 +#define KB_COLS 12 +#define KB_ROWMASK(r) (1 << (r)) +#define SCANCODE(r,c) ( ((r)<<4) + (c) + 1 ) +//#define NR_SCANCODES (SCANCODE(KB_ROWS-1,KB_COLS-1)+1) +#define NR_SCANCODES 128 +#define SCAN_INTERVAL (HZ/10) +#define CORGIKBD_PRESSED 1 + +#define CORGI_KEY_CALENDER KEY_F1 +#define CORGI_KEY_ADDRESS KEY_F2 +#define CORGI_KEY_FN KEY_F3 +#define CORGI_KEY_OFF KEY_F4 +#define CORGI_KEY_EXOK KEY_F5 +#define CORGI_KEY_EXCANCEL KEY_F6 +#define CORGI_KEY_EXJOGDOWN KEY_F7 +#define CORGI_KEY_EXJOGUP KEY_F8 +#define CORGI_KEY_JAP1 KEY_F9 +#define CORGI_KEY_JAP2 KEY_F10 +#define CORGI_KEY_OK KEY_F11 +#define CORGI_KEY_MENU KEY_F12 + +static unsigned char corgikbd_keycode[NR_SCANCODES] = { + 0, /* 0 */ + 0, KEY_1, KEY_3, KEY_5, KEY_6, KEY_7, KEY_9, KEY_0, KEY_BACKSPACE, 0, 0, 0, 0, 0, 0, 0, /* 1-16 */ + 0, KEY_2, KEY_4, KEY_R, KEY_Y, KEY_8, KEY_I, KEY_O, KEY_P, 0, 0, 0, 0, 0, 0, 0, /* 17-32 */ + KEY_TAB, KEY_Q, KEY_E, KEY_T, KEY_G, KEY_U, KEY_J, KEY_K, 0, 0, 0, 0, 0, 0, 0, 0, /* 33-48 */ + CORGI_KEY_CALENDER, KEY_W, KEY_S, KEY_F, KEY_V, KEY_H, KEY_M, KEY_L, 0, KEY_RIGHTSHIFT, 0, 0, 0, 0, 0, 0, /* 49-64 */ + CORGI_KEY_ADDRESS, KEY_A, KEY_D, KEY_C, KEY_B, KEY_N, KEY_DOT, 0, KEY_ENTER, 0, KEY_LEFTSHIFT, 0, 0, 0, 0, 0, /* 65-80 */ + KEY_MAIL, KEY_Z, KEY_X, KEY_MINUS, KEY_SPACE, KEY_COMMA, 0, KEY_UP, 0, 0, 0, CORGI_KEY_FN, 0, 0, 0, 0, /* 81-96 */ + KEY_HOME, CORGI_KEY_JAP1, CORGI_KEY_JAP2, KEY_CANCEL, CORGI_KEY_OK, CORGI_KEY_MENU, KEY_LEFT, KEY_DOWN, KEY_RIGHT, 0, 0, 0, 0, 0, 0, 0, /* 97-112 */ + CORGI_KEY_OFF, CORGI_KEY_EXOK, CORGI_KEY_EXCANCEL, CORGI_KEY_EXJOGDOWN, CORGI_KEY_EXJOGUP, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 /* 113-127 */ +}; + + +struct corgikbd { + unsigned char keycode[NR_SCANCODES]; + struct input_dev input; + char phys[32]; + + unsigned char state[NR_SCANCODES]; + spinlock_t lock; + + struct timer_list timer; +}; + +static struct corgikbd corgikbd; + +#define KB_DISCHARGE_DELAY 10 +#define KB_ACTIVATE_DELAY 10 + +#define GET_ROWS_STATUS(c) (((GPLR1 & CORGI_GPIO_HIGH_SENSE_BIT) >> CORGI_GPIO_HIGH_SENSE_RSHIFT) | ((GPLR2 & CORGI_GPIO_LOW_SENSE_BIT) << CORGI_GPIO_LOW_SENSE_LSHIFT)) + +/* helper functions for reading the keyboard matrix */ +static inline void corgikbd_discharge_all(void) +{ + // STROBE All HiZ + GPCR2 = CORGI_GPIO_ALL_STROBE_BIT; + GPDR2 &= ~CORGI_GPIO_ALL_STROBE_BIT; +} + +static inline void corgikbd_activate_all(void) +{ + // STROBE ALL -> High + GPSR2 = CORGI_GPIO_ALL_STROBE_BIT; + GPDR2 |= CORGI_GPIO_ALL_STROBE_BIT; + + udelay(KB_DISCHARGE_DELAY); + + // STATE CLEAR + GEDR1 |= CORGI_GPIO_HIGH_SENSE_BIT; + GEDR2 |= CORGI_GPIO_LOW_SENSE_BIT; +} + +static inline void corgikbd_activate_col(int col) +{ + // STROBE col -> High, not col -> HiZ + GPSR2 = CORGI_GPIO_STROBE_BIT(col); + GPDR2 = (GPDR2 & ~CORGI_GPIO_ALL_STROBE_BIT) | CORGI_GPIO_STROBE_BIT(col); +} + +static inline void corgikbd_reset_col(int col) +{ + // STROBE col -> Low + GPCR2 = CORGI_GPIO_STROBE_BIT(col); + // STROBE col -> out, not col -> HiZ + GPDR2 = (GPDR2 & ~CORGI_GPIO_ALL_STROBE_BIT) | CORGI_GPIO_STROBE_BIT(col); +} + +/* + * The corgi keyboard only generates interrupts when a key is pressed. + * So when a key is pressed, we enable a timer. This timer scans the + * keyboard, and this is how we detect when the key is released. + */ + +/* Scan the hardware keyboard and push any changes up through the input layer */ +static void corgikbd_scankeyboard(struct corgikbd *corgikbd_data, struct pt_regs *regs) +{ + unsigned int row, col, rowd, scancode; + unsigned long flags; + unsigned int num_pressed; + + spin_lock_irqsave(&corgikbd_data->lock, flags); + + if (regs) + input_regs(&corgikbd_data->input, regs); + + num_pressed = 0; + for (col = 0; col < KB_COLS; col++) { + /* + * Discharge the output driver capacitatance + * in the keyboard matrix. (Yes it is significant..) + */ + + corgikbd_discharge_all(); + udelay(KB_DISCHARGE_DELAY); + + corgikbd_activate_col( col); + udelay(KB_ACTIVATE_DELAY); + + rowd = GET_ROWS_STATUS(col); + for (row = 0; row < KB_ROWS; row++ ) { + scancode = SCANCODE(row, col); + if (rowd & KB_ROWMASK(row)) { + num_pressed += 1; + if (!(corgikbd_data->state[scancode] & CORGIKBD_PRESSED)) { + corgikbd_data->state[scancode] |= CORGIKBD_PRESSED; + /*printk("kbd_press=%d\n",scancode);*/ + input_report_key(&corgikbd_data->input, corgikbd_data->keycode[scancode], 1); + } + } else { + if (corgikbd_data->state[scancode] & CORGIKBD_PRESSED) { + corgikbd_data->state[scancode] &= ~CORGIKBD_PRESSED; + /*printk("kbd_release=%d\n",scancode);*/ + input_report_key(&corgikbd_data->input, corgikbd_data->keycode[scancode], 0); + } + } + } + corgikbd_reset_col(col); + } + + corgikbd_activate_all(); + + input_sync(&corgikbd_data->input); + + /* if any keys are pressed, enable the timer */ + if (num_pressed) + mod_timer(&corgikbd_data->timer, jiffies + SCAN_INTERVAL); + + spin_unlock_irqrestore(&corgikbd_data->lock, flags); +} + +/* + * corgi keyboard interrupt handler. + */ +static irqreturn_t corgikbd_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct corgikbd *corgikbd_data = dev_id; + + if (!timer_pending(&corgikbd_data->timer)) + { + /** wait chattering delay **/ + udelay(20); + corgikbd_scankeyboard(corgikbd_data, regs); + } + + return IRQ_HANDLED; +} + +/* + * corgi timer checking for released keys + */ +static void corgikbd_timer_callback(unsigned long data) +{ + struct corgikbd *corgikbd_data = (struct corgikbd *) data; + corgikbd_scankeyboard(corgikbd_data, NULL); +} + + +static int __init corgikbd_init(void) { + + int i; + + spin_lock_init(corgikbd.lock); + + init_timer(&corgikbd.timer); + corgikbd.timer.function = corgikbd_timer_callback; + corgikbd.timer.data = (unsigned long) &corgikbd; + + corgikbd.input.evbit[0] = BIT(EV_KEY) | BIT(EV_REP); + + init_input_dev(&corgikbd.input); + corgikbd.input.keycode = corgikbd.keycode; + corgikbd.input.keycodesize = sizeof(unsigned char); + corgikbd.input.keycodemax = ARRAY_SIZE(corgikbd_keycode); + corgikbd.input.private = &corgikbd; + + memcpy(corgikbd.keycode, corgikbd_keycode, sizeof(corgikbd.keycode)); + for (i = 0; i < NR_SCANCODES; i++) + set_bit(corgikbd.keycode[i], corgikbd.input.keybit); + clear_bit(0, corgikbd.input.keybit); + + strcpy(corgikbd.phys, "corgikbd/input0"); + + corgikbd.input.name = "corgi keyboard"; + corgikbd.input.phys = corgikbd.phys; + corgikbd.input.id.bustype = BUS_XTKBD; + corgikbd.input.id.vendor = 0x0001; + corgikbd.input.id.product = 0x0001; + corgikbd.input.id.version = 0x0100; + + /* Setup sense interrupts - RisingEdge Detect, sense lines as inputs */ + for (i = 0; i < CORGI_KEY_SENSE_NUM; i++) { + pxa_gpio_mode( CORGI_GPIO_KEY_SENSE(i) | GPIO_IN); + if (request_irq(CORGI_IRQ_GPIO_KEY_SENSE(i), corgikbd_interrupt, + SA_INTERRUPT, "corgikbd", &corgikbd)) { + printk("corgikbd: Can't get IRQ: %d !\n", i); + } else { + /*printk("corgikbd: Got IRQ: %d for keyboard!\n", i);*/ + set_irq_type(CORGI_IRQ_GPIO_KEY_SENSE(i),IRQT_RISING); + } + } + + /* Set Strobe lines as outputs - set high */ + for (i = 0; i < CORGI_KEY_STROBE_NUM; i++) { + pxa_gpio_mode( CORGI_GPIO_KEY_STROBE(i) | GPIO_OUT | GPIO_DFLT_HIGH); + } + + input_register_device(&corgikbd.input); + + printk(KERN_INFO "input: corgi keyboard on corgikbd\n"); + + return 0; +} + +static void __exit corgikbd_exit(void) { + + int i; + for (i = 0; i < CORGI_KEY_SENSE_NUM; i++) { + free_irq(CORGI_IRQ_GPIO_KEY_SENSE(i),&corgikbd); + } + input_unregister_device(&corgikbd.input); +} + +module_init(corgikbd_init); +module_exit(corgikbd_exit); + +MODULE_AUTHOR("Richard Purdie "); +MODULE_DESCRIPTION("Corgi keyboard driver"); +MODULE_LICENSE("GPL"); --- linux-2.6.10-rc2/drivers/input/keyboard/Makefile~corgi_kbd-r1.patch +++ linux-2.6.10-rc2/drivers/input/keyboard/Makefile @@ -13,3 +13,4 @@ obj-$(CONFIG_KEYBOARD_LOCOMO) += locomokbd.o obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o obj-$(CONFIG_KEYBOARD_98KBD) += 98kbd.o +obj-$(CONFIG_KEYBOARD_CORGI) += corgikbd.o --- linux-2.6.10-rc2/drivers/input/keyboard/Kconfig~corgi_kbd-r1.patch +++ linux-2.6.10-rc2/drivers/input/keyboard/Kconfig @@ -63,6 +63,15 @@ To compile this driver as a module, choose M here: the module will be called locomokbd. +config KEYBOARD_CORGI + tristate "Corgi Keyboard Support" + depends on INPUT && INPUT_KEYBOARD + help + Say Y here if you are running Linux on a Sharp Zaurus SL-C7xx (Corgi,Shepherd,Husky or Boxer) + + To compile this driver as a module, choose M here: the + module will be called corgikbd. + config KEYBOARD_XTKBD tristate "XT Keyboard support" depends on INPUT && INPUT_KEYBOARD