Index: linux-2.6.13/arch/arm/mach-pxa/poodle.c
===================================================================
--- linux-2.6.13.orig/arch/arm/mach-pxa/poodle.c	2005-09-15 12:05:17.000000000 +0100
+++ linux-2.6.13/arch/arm/mach-pxa/poodle.c	2005-09-15 12:05:32.000000000 +0100
@@ -126,6 +126,15 @@
 {
 	int ret = 0;
 
+	/* setup sleep mode values */
+	PWER  = 0x00000002;
+	PFER  = 0x00000000;
+	PRER  = 0x00000002;
+	PGSR0 = 0x00008000;
+	PGSR1 = 0x003F0202;
+	PGSR2 = 0x0001C000;
+	PCFR |= PCFR_OPDE;
+
 	/* cpu initialize */
 	/* Pgsr Register */
   	PGSR0 = 0x0146dd80;
@@ -171,32 +180,12 @@
 	sharpsl_save_param();
 }
 
-static struct map_desc poodle_io_desc[] __initdata = {
- /* virtual     physical    length                   */
-  { 0xef800000, 0x00000000, 0x00800000, MT_DEVICE }, /* Boot Flash */
-};
-
-static void __init poodle_map_io(void)
-{
-	pxa_map_io();
-	iotable_init(poodle_io_desc, ARRAY_SIZE(poodle_io_desc));
-
-	/* setup sleep mode values */
-	PWER  = 0x00000002;
-	PFER  = 0x00000000;
-	PRER  = 0x00000002;
-	PGSR0 = 0x00008000;
-	PGSR1 = 0x003F0202;
-	PGSR2 = 0x0001C000;
-	PCFR |= PCFR_OPDE;
-}
-
 MACHINE_START(POODLE, "SHARP Poodle")
 	.phys_ram	= 0xa0000000,
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.fixup		= fixup_poodle,
-	.map_io		= poodle_map_io,
+	.map_io		= pxa_map_io,
 	.init_irq	= pxa_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= poodle_init,
Index: linux-2.6.13/include/asm-arm/arch-pxa/poodle.h
===================================================================
--- linux-2.6.13.orig/include/asm-arm/arch-pxa/poodle.h	2005-08-29 00:41:01.000000000 +0100
+++ linux-2.6.13/include/asm-arm/arch-pxa/poodle.h	2005-09-15 11:39:41.000000000 +0100
@@ -37,24 +37,25 @@
 #define POODLE_GPIO_nSD_DETECT		(9)
 #define POODLE_GPIO_MAIN_BAT_LOW	(13)
 #define POODLE_GPIO_BAT_COVER		(13)
+#define POODLE_GPIO_USB_PULLUP		(20)
 #define POODLE_GPIO_ADC_TEMP_ON		(21)
 #define POODLE_GPIO_BYPASS_ON		(36)
 #define POODLE_GPIO_CHRG_ON		(38)
 #define POODLE_GPIO_CHRG_FULL		(16)
 
 /* PXA GPIOs */
-#define POODLE_IRQ_GPIO_ON_KEY		IRQ_GPIO0
-#define POODLE_IRQ_GPIO_AC_IN		IRQ_GPIO1
-#define POODLE_IRQ_GPIO_HP_IN		IRQ_GPIO4
-#define POODLE_IRQ_GPIO_CO		IRQ_GPIO16
-#define POODLE_IRQ_GPIO_TP_INT		IRQ_GPIO5
-#define POODLE_IRQ_GPIO_WAKEUP		IRQ_GPIO11
-#define POODLE_IRQ_GPIO_GA_INT		IRQ_GPIO10
-#define POODLE_IRQ_GPIO_CF_IRQ		IRQ_GPIO17
-#define POODLE_IRQ_GPIO_CF_CD		IRQ_GPIO14
-#define POODLE_IRQ_GPIO_nSD_INT		IRQ_GPIO8
-#define POODLE_IRQ_GPIO_nSD_DETECT	IRQ_GPIO9
-#define POODLE_IRQ_GPIO_MAIN_BAT_LOW	IRQ_GPIO13
+#define POODLE_IRQ_GPIO_ON_KEY		IRQ_GPIO(0)
+#define POODLE_IRQ_GPIO_AC_IN		IRQ_GPIO(1)
+#define POODLE_IRQ_GPIO_HP_IN		IRQ_GPIO(4)
+#define POODLE_IRQ_GPIO_CO		IRQ_GPIO(16)
+#define POODLE_IRQ_GPIO_TP_INT		IRQ_GPIO(5)
+#define POODLE_IRQ_GPIO_WAKEUP		IRQ_GPIO(11)
+#define POODLE_IRQ_GPIO_GA_INT		IRQ_GPIO(10)
+#define POODLE_IRQ_GPIO_CF_IRQ		IRQ_GPIO(17)
+#define POODLE_IRQ_GPIO_CF_CD		IRQ_GPIO(14)
+#define POODLE_IRQ_GPIO_nSD_INT		IRQ_GPIO(8)
+#define POODLE_IRQ_GPIO_nSD_DETECT	IRQ_GPIO(9)
+#define POODLE_IRQ_GPIO_MAIN_BAT_LOW	IRQ_GPIO(13)
 
 /* SCOOP GPIOs */
 #define POODLE_SCOOP_CHARGE_ON	SCOOP_GPCR_PA11